Why Is Microsoft 70-417 Certification Important?
Microsoft 70-417 vce helps one to pick up learning and review their comprehension of the diverse Microsoft items and administrations. The more number of Microsoft exams that you show up for, more you add to your ability set and involvement with the confirmations that you acquire. With Microsoft 70-417 exam affirmation added to your repertoire, you can conceivable acquire your fantasy work. You can likewise climb the stepping stool of achievement in your IT vocation with the right confirmations chose.
Are you going to attempt 70-417 exam to be Microsoft certified specialist? Then this message is waiting for your attention. “Don’t repeat the mistake for 70-417 preparation that mostly new candidates do”. Being industry leader we know the mistake mostly new candidates do, and that is selecting the wrong preparation method before attempting the actual exam.
Your network contains an Active Directory domain named contoso.com. All domain controllers run
Windows Server 2012 R2.
DirectAccess is deployed to the network.
Remote users connect to the DirectAccess server by using a variety of network speeds.
The remote users report that sometimes their connection is very slow.
You need to minimize Group Policy processing across all wireless wide area network (WWAN)
Which Group Policy setting should you configure?
A. Configure Direct Access connections as a fast network connection.
B. Change Group Policy processing to run asynchronously when a slow network connection is detected.
C. Configure Group Policy slow link detection.
D. Configure wireless policy processing. Correct Answer: C
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that has the Active Directory Federation Services server role installed. All servers run Windows Server 2012.
You complete the Active Directory Federation Services Configuration Wizard on Server1.
You need to ensure that client devices on the internal network can use Workplace Join.
Which two actions should you perform on Server1? (Each correct answer presents part of the solution. Choose two.)
A. Run Enable AdfsDeviceRegistration -PrepareActiveDirectory.
B. Edit the multi-factor authentication global authentication policy settings.
C. Edit the primary authentication global authentication policy settings.
D. Run Set-AdfsProxyPropertiesHttpPort 80.
E. Run Enable-AdfsDeviceRegistration. Correct Answer: CE
* To enable Device Registration Service
On your federation server, open a Windows PowerShell command window and type:
Repeat this step on each federation farm node in your AD FS farm..
Enable seamless second factor authentication Seamless second factor authentication is an enhancement in AD FS that provides an added level of access protection to corporate resources and applications from external devices that are trying to access them. When a personal device is Workplace Joined, it becomes a `known’ device and administrators can use this information to drive conditional access and gate access to resources. To enable seamless second factor authentication, persistent single sign-on (SSO) and conditional access for Workplace Joined devices In the AD FS Management console, navigate to Authentication Policies. Select Edit Global Primary Authentication. Select the check box next to Enable Device Authentication, and then click OK.
Your network contains two servers named Server 1 and Server 2 that run Windows Server 2012 R2. Both
servers have the Hyper-V server role installed. Server 1 and Server 2 are located in different offices. The
offices connect to each other by using a high-latency WAN link.
Server 1 hosts a virtual machine named VM1.
You need to ensure that you can start VM1 on Server 2 if Server 1 fails. The solution must minimize
What should you do?
A. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1.
B. on Server 1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.
C. on Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.
D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for Vml.
Correct Answer: A Explanation
Explanation/Reference: 200-125 vce
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. You create a group Managed Service Account named gservice1. You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1?
A. From the Services console, configure the General settings.
B. From a command prompt, run sc.exe and specify the sdset parameter.
C. From the Services console, configure the Log On settings.
D. From a command prompt, run sc.exe and specify the privs parameter.
Correct Answer: B Explanation
Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.
On DC10, the disk that contains the SYSVOL folder fails.
You replace the failed disk. You stop the Distributed File System (DFS) Replication service. You restore the SYSVOL folder.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which tool should you use before you start the DFS Replication service on DC10?
A. Active Directory Sites and Services
Correct Answer: C Explanation
How to perform a non-authoritative synchronization of DFSR-replicated SYSVOL (like “D2″ for FRS)
1. In theADSIEDIT.MSC tool modify the following distinguished name (DN) value and attribute on each of the domain controllers that you want to make non-authoritative:
CN=SYSVOL Subscription,CN=Domain System Volume,CN=DFSR- LocalSettings,CN=<the server name>,OU=Domain Controllers,DC=<domain>
2. Force Active Directory replication throughout the domain. Etc
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server 1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
C. File Server Resource Manager (FSRM)
Correct Answer: B Explanation
You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file=”C:\vdisks\disk1.vhd” maximum=16000
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Convert Disk 1 to a dynamic disk.
C. Delete partition E.
D. Take Disk 1 offline. Correct Answer: D
Explanation: NB: added the missing exhibit http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-inhyper- v.aspx Passthrough Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective. Additionally, this raw piece of storage is not limited in size so, hypothetically, it can be a multi terabyte LUN.
After storage is mapped to the Hyper-V server, it will appear as a raw volume and will be in an Offline state (depending on the SAN Policy (Figure 1-1)) as seen in Figure 1.
We stated earlier that a disk must be Offline from the Hyper-V servers’ perspective in order for the Guest to have exclusive access. However, a raw volume must first be initialized before it can be used. To accomplish this in the Disk Management interface, the disk must first be brought Online. Once Online, the disk will show as being Not Initialized (Figure 2).
Right-click on the disk and select Initialize Disk (Figure 3)
Select either an MBR or GPT partition type (Figure 4).
Once a disk is initialized, it can once again be placed in an Offline state. If the disk is not in an Offline state, it will not be available for selection when configuring the Guest’s storage. In order to configure a Pass-through disk in a Guest, you must select Attach a virtual disk later in the New Virtual Machine Wizard (Figure 5).
If the Pass-through disk will be used to boot the operating system, it must be attached to an IDE Controller. Data disks can take advantage of SCSI controllers. In Figure 6, a Passthrough disk is attached to IDE Controller 0.
Note: If the disk does not appear in the drop down list, ensure the disk is Offline in the Disk Management interface (In Server CORE, use the diskpart.exe CLI). Once the Pass-through disk is configured, the Guest can be started and data can placed on the drive. If an operating system will be installed, the installation process will properly prepare the disk. If the disk will be used for data storage, it must be prepared in the Guest operating system before data can be placed on it. If a Pass- through disk, being used to support an operating system installation, is brought Online before the Guest is started, the Guest will fail to start. When using Pass-through disks to support an operating system installation, provisions must be made for storing the Guest configuration file in an alternate location. This is because the entire Pass-through disk is consumed by the operating system installation. An example would be to locate the configuration file on another internal drive in the Hyper-V server itself. Or, if it is a cluster, the configuration file can be hosted on a separate cluster providing highly available file services. Be aware that Pass-through disks cannot be dynamically expanded. Additionally, when using Pass-through disks, you lose the capability to take snapshots, and finally, you cannot use differencing disks with Pass-through disks.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.
VM1 has a legacy network adapter.
You need to assign a specific amount of available network bandwidth to VM1.
What should you do first?
A. Add a second legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
B. Add a second legacy network adapter, and then configure network adapter teaming.
C. Remove the legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
D. Remove the legacy network adapter, and then add a network adapter.
Correct Answer: D Explanation Explanation/Reference:
Add a New network adapter because the legacy network adapter doesn’t support bandwidth management.
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1. You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM “VM6” | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM “VM5” | Set-VMNetworkAdapter -IovWeight 0
C. Get-VM “VM6” | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “VM6” | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM “VM5” | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM “VM5” | Set-VMNetworkAdapter -AllowTeaming On
Correct Answer: CE Explanation
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination.
If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets.
If set to Destination, it receives copied packets from the source virtual network adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
Cash Back Guarantee!
Here at https://www.pass4itsure.com/70-417.html we are helping candidates to prepare and pass Microsoft 70-417 exam in first attempt without wasting time, energy and money. We not only provide 70-417 preparation material but also we provide 100% success guarantee if you prepare 70-417 dumps through our preparation material. You can test before purchasing to be confident about what you are paying for.
The best part about learning Microsoft 70-417 with Dumpsure is that we set you up to exceed expectations. We don’t leave anything shy of guaranteeing that you get the most complete arrangement of Microsoft 70-417 pdf inquiries and answers arranged by the most splendid personalities from Microsoft. We offer simple to-review Microsoft 70-417 readiness material with inquiries and answers pdf that won’t take you a ton of time to appreciate and you can without much of a stretch concealment the whole Microsoft 70-417 syllabus for your examination. Our fundamental target is to guarantee that you pass your Microsoft 70-417 exam in the primary endeavor with the assistance of our precise and genuine case.
70-417 Free Demo Download: http://www.pass4sureshop.com/2016-latest-microsoft-70-417-exam.html
To check out more about 70-417 exam click here:http://www.examprepwebinar.com/get-cisco-200-355-dumps.html