[100% Valid] 100% Pass Rate Cisco 200-105 Dumps (ICND2 v3.0) Exam Study Material Video Practice Test Interconnecting Cisco Networking Devices Part 2

Where can I find accurate study materials for the Cisco 200-105 dumps exam? The Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) (200-105 ICND2) exam is a 90 Minutes (45-55 questions) assessment in pass4itsure that is associated with the Cisoc certification.”Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)” is the exam name of Pass4itsure Cisco 200-105 dumps test which designed to help candidates prepare for and pass the Cisco 200-105 exam.

100% pass rate Cisco 200-105 dumps (ICND2 v3.0) exam study material practice test Interconnecting Cisco Networking Devices Part 2. Pass4itsure has come up with the latest training material about Cisco certification 200-105 dumps actual test. Please add Pass4itsure’s Cisco certification https://www.pass4itsure.com/200-105.html exam test and answers to your cart now!

[100% Other Cisco Valid Pass4itsure 200-105 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E

[100% Other Cisco Valid Pass4itsure 200-125 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWT2VSaUVoODRKR1k

200-105 dumps
Latest and Most Accurate Pass4itsure 200-105 Dumps Exam Q&As:
QUESTION 11
What are two drawbacks of implementing a link-state routing protocol? (Choose two.)
A. the sequencing and acknowledgment of link-state packets
B. the requirement for a hierarchical IP addressing scheme for optimal functionality
C. the high volume of link-state advertisements in a converged network
D. the high demand on router resources to run the link-state routing algorithm
E. the large size of the topology table listing all advertised routes in the converged network
200-105 exam Correct Answer: BD
Explanation/Reference:
Link State routing protocols, such as OSPF and IS-IS, converge more quickly than their distance vector routing protocols such as RIPv1, RIPv2, EIGRP and so on, through the use of flooding and trigge
QUESTION 12
Which EIGRP for IPv6 command can you enter to view the link-local addresses of the neighbors of a device?
A. show ipv6 eigrp 20 interfaces
B. show ipv6 route eigrp
C. show ipv6 eigrp neighbors
D. show ip eigrp traffic
Correct Answer: C
QUESTION 13
Refer to the exhibit.
200-105 dumps
Given the output from the andquot;show ip eigrp topologyandquot; command, which router is the feasible successor?
200-105 dumps
200-105 dumps Correct Answer: B
Explanation/Reference:
To be the feasible successor, the Advertised Distance (AD) of that route must be less than the Feasible Distance (FD)
of the successor. From the output of the andquot;show ip eigrp topology 10.0.0.5
QUESTION 14
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links. R2 and R3 are
connected to the switches SW1 and SW2,
respectively. SW1 and SW2 are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers. Use the appropriate show
commands to troubleshoot the issues.

200-105 dumps
200-105 dumps
200-105 dumps
200-105 dumps
200-105 dumps
The loopback interfaces on R4 with the IP addresses of 10.4.4.4 /32, 10.4.4.5/32. and 10.4.4.6/32 are not appearing in
the routing table of R5 Why are the interfaces missing?
A. The interfaces are shutdown, so they are not being advertised.
B. R4 has been incorrectly configured to be in another AS, so it does not peer with R5.
C. Automatic summarization is enabled, so only the 10.0.0.0 network is displayed.
D. The loopback addresses haven\’t been advertised, and the network command is missing on R4.
Correct Answer: B
Explanation
Explanation/Reference:
For an EIGRP neighbor to form, the following must match:
-Neighbors must be in the same subnet- K values- AS numbers- Authentication method and key strings Here, we see
tha
QUESTION 15
200-105 dumps
200-105 dumps
R1# show running-config interface Loopback0 description ***Loopback*** ip address 192.168.1.1 255.255.255.255 ip
ospf 1 area 0 ! interface Ethernet0/0 description **Connected to R1-LAN** ip address 10.10.110.1 255.255.255.0 ip ospf
1 area 0 ! interface Ethernet0/1 description **Connected to L2SW** ip address 10.10.230.1 255.255.255.0 ip ospf hello
interval 25 ip ospf 1 area 0 ! router ospf 1 log-adjacency-changes

200-105 dumps
R2# show running-config
R2 ! interface Loopback0 description **Loopback** ip address 192.168.2.2 255.255.255.255 ip ospf 2 area 0 ! interface
Ethernet0/0 description **Connected to R2-LAN** ip address 10.10.120.1 255.255.255.0 ip ospf 2 area 0 ! interface

Ethernet0/1 description **Connected to L2SW** ip address 10.10.230.2 255.255.255.0 ip ospf 2 area 0 ! router ospf 2
log-adjacency-changes

200-105 dumps
R3# show running-config R3 username R6 password CISCO36 ! interface Loopback0 description **Loopback** ip
address 192.168.3.3 255.255.255.255 ip ospf 3 area 0 ! interface Ethernet0/0 description **Connected to L2SW** ip
address 10.10.230.3 255.255.255.0 ip ospf 3 area 0 ! interface Serial1/0 description **Connected to R4-Branch1 office**
ip address 10.10.240.1 255.255.255.252 encapsulation ppp
ip ospf 3 area 0 ! interface Serial1/1 description **Connected to R5-Branch2 office** ip address 10.10.240.5
255.255.255.252 encapsulation ppp ip ospf hello-interval 50 ip ospf 3 area 0 ! interface Serial1/2 description
**Connected to R6-Branch3 office** ip address 10.10.240.9 255.255.255.252 encapsulation ppp ip ospf 3 area 0 ppp
authentication chap ! router ospf 3 router-id 192.168.3.3 !

200-105 dumps
R4# show running-config R4 ! interface Loopback0 description **Loopback** ip address 192.168.4.4 255.255.255.255 ip
ospf 4 area 2 ! interface Ethernet0/0 ip address 172.16.113.1 255.255.255.0 ip ospf 4 area 2 ! interface Serial1/0
description **Connected to R3-Main Branch office** ip address 10.10.240.2 255.255.255.252 encapsulation ppp ip ospf
4 area 2 ! router ospf 4 log-adjacency-changes

200-105 dumps
R5# show running-config R5 ! interface Loopback0 description **Loopback** ip address 192.168.5.5 255.255.255.255 ip
ospf 5 area 0 ! interface Ethernet0/0 ip address 172.16.114.1 255.255.255.0 ip ospf 5 area 0 ! interface Serial1/0
description **Connected to R3-Main Branch office** ip address 10.10.240.6 255.255.255.252 encapsulation ppp ip ospf
5 area 0 
! router ospf 5 log-adjacency-changes R6# show running-config R6 username R3 password CISCO36 ! interface
Loopback0 description **Loopback** ip address 192.168.6.6 255.255.255.255 ip ospf 6 area 0 ! interface Ethernet0/0 ip
address 172.16.115.1 255.255.255.0 ip ospf 6 area 0 ! interface Serial1/0

200-105 dumps
description **Connected to R3-Main Branch office** ip address 10.10.240.10 255.255.255.252 encapsulation ppp ip
ospf 6 area 0 ppp authentication chap ! router ospf 6 router-id 192.168.3.3 !

200-105 dumps
R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?
A. R1 ethernet0/1 is shutdown. Configure the no shutdown command.
B. R1 ethernet0/1 configured with a non-default OSPF hello interval of 25, configure no ip ospf hello interval 25
C. R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello interval 25
D. Enable OSPF for R1 ethernet0/1; configure ip ospf 1 area 0 command under ethernet0/1
200-105 pdf Correct Answer: B

QUESTION 16
Refer to the exhibit.
200-105 dumps
Based on the exhibited routing table, how will packets from a host within the 192.168.10.192/26 LAN be forwarded to
192.168.10.1?
A. The router will forward packets from R3 to R2 to R1.
B. The router will forward packets from R3 to R1 to R2.
C. The router will forward packets from R3 to R2 to R1 AND from R3 to R1.
D. The router will forward packets from R3 to R1.
Correct Answer: C
Explanation

Explanation/Reference:
From the routing table we learn that network 192.168.10.0/30 is learned via 2 equal- cost paths (192.168.10.9 andamp;192.168.10.5) – traffic to this network will be load-balanced.

200-105 dumps
Pass4itsure has provided part of Cisco 200-105 dumps actual test and answers for you on www.Pass4itsure.com and you can free download as a try. I believe you will be very satisfied with our products. With our products you can easily pass the exam.We promise that if you have used Pass4itsure’s latest Cisco https://www.pass4itsure.com/200-105.html dumps actual test and answers exam but fail to pass the exam, Pass4itsure will give you a full refund.